Description

This aircraft is in great shape and has all the popular Alaska Super Cub modifications, including a 2000 lb maximum gross weight upgrade, Lycoming 180 HP engine, reinforced 3rd seat baggage area, headerless fuel system, and even external load permit(s) for both wheels and floats. Completely rebuilt at CubCrafters in 2006 to the exacting specifications of a longtime Alaska resident that had previously owned more than 25 different Super Cubs, this aircraft is the ultimate Alaska PA-18 bush machine that has every conceivable PA-18 improvement and STC all wrapped up into one great package. With only a little over 600 hours since being completely re-built, and always having been hangered when not in use; its very apparent this aircraft has been well cared for.

The external load approval to carry trophy horns, snowshoes, cross-country skis, rifles, rifle scabbards, or even dimensional lumber (when on floats) is particularly valuable when in Alaska. We at CubCrafters get asked about external load permits all the time, they are not transferable between aircraft and they simply haven’t been issued by the FAA for many years; the only way to get external load approval on a Super Cub anymore is to buy an aircraft that already has been approved. It’s a great value-added feature that is highly desirable.

N4293Z has an upgraded instrument panel, VG’s and automatically drooping ailerons for slow flight, the big 180 HP engine, the long 82″ prop, extended landing gear and tundra tires for off-airport work, and the belly pod for extra fuel and cargo; everything you could imagine for a truly backcountry capable PA-18 has already been done, this aircraft is ready to go for any adventure!

Equipment

Firewall Forward:

Lycoming O-360-C4P engine
McCauley 1A200/FA8241 propeller
Propeller spinner assembly
HD muffler assembly
2-piece muffler shroud
B&C spin-on oil filter
Niagara oil cooler
Airborne vacuum pump
Tanis engine heater

Electrical:

B&C 40-amp alternator
Lightweight starter, Sky-Tec
Lightweight battery under rear seat
LR3 regulator
Dual landing lights
LED Nav/Strobes
Flashing tail beacon
Strobe system, 3-point
Precise Flight Pulselite system

Fuel System:

23 Gallon Dakota Cub wing tanks
Fuel transfer pump
F. Atlee Dodge fuel site gauges
Fuel Selector Valve: L, R, Both, Off

Panel:

Deluxe instrument panel
Directional gyro (vacuum)
Airpath whiskey compass
ACK A30 blind encoder
Electronics Int’l single-point EGT gauge
Electronics Int’l single-point CHT gauge
Electronics Int’l OPT-1 oil pressure/oil temp gauge
Electronics Int’l VA-1 volt/amp gauge
OAT (outside air temp)
Astrotech chronometer (clock)
AK 451 ELT, 406mhz, remote switch
Suction gauge
Airpath RCA 2600-3 compass
Turn coordinator (vacuum)
Airspeed indicator
VSI (vertical speed indicator)
Electric artificial horizon
20k altimeter
Garmin GNC 250xl GPS/COM
ICOM 1A200 COM radio
Garmin GTX 327 transponder
Analogue tachometer
Electronics Int’l fuel computer
Push-button starter
Cockpit adjustable oil-cooler baffle
Fuel primer
GMA 340 audio panel
Panel mounted auxilary power port
GPS Map 495 with remote antenna
Vernier mixture

Interior:

3rd seat/180-lb baggage compartment
Reverse dog-leg brace modification
Headset J-Hooks
Folding front seat
Oregon Aero leather seats
Deluxe door seals
F & R inertial reel shoulder harnesses
F. Atlee Dodge floor-mounted front lap belt
LIMO/Bose headset jacks, GA plugs
Map pocket, aluminum
Extended cabin heat
Rear Seat cabin heat
Removable rear seat crossbar
Rear seat storage compartment
Aluminum headliner, Cub Crafters
Extended baggage compartment/cargo net
F & R PTT switches
Side access baggage door
Battery access door
Tinted skylight
Dual LED cockpit lights
Fire extinguisher
Control lock
Full metal floorboards

Landing Gear:

31″ Alaska Bushwheels
Cleveland wheels and brakes
HP brake master cylinders
Parking brakes
3″ extended landing gear, 1 1/2″ axle
3″ extended safety cables
Hubcaps
Fueling steps
HD cabane vee
HD shock struts
F. Atlee Dodge float step
Pawnee tail spring
Non-standard 10″ Tailwheel

Special Features/Modifications:

Front spar lift strut reinforcement bracket
Extended flaps
Vortex generators
SS tie down rings
Float lift rings
Top Cub STOL kit
Dakota Cub ribs
Airglas fuel & cargo pod
Stainless steel control cables
“X” brace in skylight
2000-lb gross weight increase
Reinforced fuselage
Weld-on float fittings
F. Atlee Dodge HD tie-downs
External door handle, Cub Crafters
Side-window snap vent
Dual COM antennae
Dual GPS antennae
Heated pitot
Dual static ports
Blade-style transponder antenna
Stits polyfiber fabric covering
PA-18 Flight manual supplements

Click below for:

Airframe Log Scan N4293Z
Engine Log Scan N4293Z
Prop Log Scan N4293Z
PA18 External Load STC

Price: $185,000

Contact

Brad Damm, Factory Direct Sales (509) 961-2313 – brad.damm@cubcrafters.com