![\"\"](\"https:\/\/cubcrafters.com\/c\/wp-content\/uploads\/2018\/05\/CubCrafters-FX-3-Ground-5.jpg\")
\nCubCrafters will significantly increase production of the line of light two-place tandem aircraft it manufactures in 2019. <\/p>\n
\nCubCrafters will significantly increase production of the line of light two-place tandem aircraft it manufactures in 2019. <\/p>\n
CubCrafters\u2019 Director of Sales, Brad Damm, says, \u201cBackcountry flying is increasing in popularity and CubCrafters has seen continuous sales growth since the introduction of the Light Sport Carbon Cub in 2009. The launch of the Part 23 Certified XCub in 2016 and the addition of the Garmin G3X glass avionics package for the XCub in 2017 further accelerated sales. Now, with the introduction of the new 3rd generation of the Carbon Cub that includes an advanced engine and constant speed propeller, our order backlog has increased to almost two years.\u201d <\/p>\n
CubCrafters took deposits for over 100 new factory-built aircraft in 2017, with over 40 of those orders occurring in the fourth quarter alone. Sales were boosted in large part by the introduction of the new Carbon Cub FX-3 and XCub\u2019s EFIS panel option. Today, the product line has expanded to include six different production aircraft models. Also contributing to the company\u2019s success is their popular \u201cFactory eXperimental\u201d (FX) Builder Assist program, where owners participate in the fabrication and assembly of their own Experimental Amateur Built (E-AB) certified aircraft at the factory. In addition, CubCrafters offers two versions of Carbon Cub kits for owner assembly and certification offsite. <\/p>\n
\u201cDuring development and FAA certification testing of our new XCub, we planned for the contingency of expanded production,\u201d explains Patrick Horgan, CubCrafters Vice President of Operations and Product Development. \u201cIncreased sales volumes necessitated the execution of our plans. Our manufacturing floor space was increased over 50% through the construction of three new fabrication facilities. Our teams carefully assessed and refined critical fabrication and assembly processes to further minimize waste while optimizing quality and throughput. We are certainly grateful for the market response to the XCub and FX-3.\u201d CubCrafters began ramping-up production rates at the end of 2017 and will continue to do so into 2019. <\/p>\n","protected":false},"excerpt":{"rendered":"