CubCrafters Services: Rebuilding Cubs since 1980.

Inertia-Reel Shoulder Harness

FRONT:

REAR:

Manufactured for Cub Crafters, Inc. by AmSafe, Inc.

40003-001

$339.00

Shoulder Harness, Inertia Reel w/lap belt (27-inch short length)

Standard Length 27" Lap Belt to retrofit a standard Super Cub. TSO'd C114 Note: 337 field approval required or reasearch FAA advisory matierial on shoulder harnesses and install it with a log entry as a minor change.

40002-001

$339.00

Shoulder Harness, Inertia Reel w/lap belt (38-inch long length)

black, long lap belt 38" each side. This belt is only for cubs that have been modified with the floor mounted seatbelt attach points (P/N 3246-B). TSO'd C114 Note: 337 field approval required or reasearch FAA advisory matierial on shoulder harnesses and install it with a log entry as a minor change.

KIT40002-001

$49.50

Shoulder Harness Installation (PA18 Front Seat)

Installation kit for Inertia Reel shoulder harness in the front seat. Note: 337 field approval required.

KIT40002-003

$49.50

Shoulder Harness Installation Kit (PA18 Rear Seat)

Installation kit for Inertia Reel shoulder harness in the rear seat. Note: 337 field approval required.

KIT40002-005

$49.50

Shoulder Harness Installation Kit (PA12 Front Seat)

Note: 337 field approval required.

3246-B

$125.00

Floor Mount Seat Belt Brackets, STCd

Allows the pilot seat belt to be attached to the floor rather than to the seat frame assembly. This is a big safety improvement since on impact, the seat-mounted seat belt has a tendency to bend the seat frame forward, trapping the pilot in the airplane. This kit includes the parts that you will need to add to the floor, the new attach point. (Can not be done on a covered aircraft)