New Condition XCub Available Now! (N75XC) – SOLD
- Location: CubCrafters Factory - Yakima, Washington
- Serial: CC19-0016
- Make: CubCrafters
- Model: CC19 XCub
- Year: 2017
- N Number: N75XC
- TTAF: 46 Hours
- TTE: 46 Hours
- Engine: Lycoming 0-360 C1G
- Prop: 78" Hartzell Trailblazer Composite
- Fuel Capacity: 49 US Gallons
- Empty Weight: 1345 lbs.
- Gross Weight: 2300 LBS (955 lbs useful load)
- Last Annual: April of 2018 at CubCrafters Factory
- Interior Rating: 10
- Exterior Rating: 10
The XCub is the aircraft that checks every box on an adventure Pilot’s wish list: remarkable STOL performance, generous useful load, class-defining speed and cross-country range, with both the pilot and a passenger enjoying comfort and convenience.
N75XC is outfitted with a composite constant-speed composite prop that is both extraordinarily lightweight and efficient which allows a cruise speed of up to 135 miles per hour on the installed 29″ Alaska Bush Wheel tundra tires. Cruising slightly slower at 120 mph with a fuel capacity of 49 gallons extends the aircraft’s range to over 800 miles. Go even a little slower, at an economy cruise of 110 mph, and the range extends to almost 1,000 miles. This makes N75XC an extraordinarily versatile aircraft.
All XCubs are built on a wholly original fuselage design. The CNC milled 4130 chromoly steel frame meets the latest FAA Part 23 certification standards for 2,300 lb gross weight aircraft to ensure N75XC is one of the strongest Cub type aircraft ever produced.
The G-Series ailerons on N75XC improve handling in all aspects of the flight envelope. The roll authority has been improved by redesigning the aileron airfoil and relocating the hinge point. Push-rod aileron controls directly replace cables and pulleys eliminating cable stretch. Pilots experience a smooth, tactile feel with markedly lighter and crisper roll response compared to legacy aircraft. Roll rate is increased and control harmony is fantastic. Following a river, carving turns at treetop level in an XCub is something every pilot should experience.
N75XC features CubCrafters new aerodynamic aluminum spring gear that is both stronger than legacy gear and provides superior damping and control on unimproved landing areas. N75XC also has float fittings and hidden, pre-welded, tabs on the airframe to support hydraulic pack installations for amphibious applications. The XCub 2,300-pound gross weight capability allows up to 800 lbs of useful load on floats, with both straight and amphibious floats from Wipaire now certified for XCub.
N75XC has outstanding cockpit ergonomics. High seat positioning, low side windows, a low-profile instrument panel, and a tapered cowl assure a panoramic view. The stick is comfortably and precisely positioned. The seats feature memory foam cushions to assure comfort and circulation for long cross-country flights. The instrument panel flows intuitively with engine controls on the left and avionics/lighting on the right. The interior package offers Scottish leather seats with perforated inserts and contrast stitching. There are 12 storage areas in the cabin, two bottle holders, four USB charging ports and two 12V power outlets. A rear seat electronics console holds both phones or tablets.
All XCubs ever manufactured by CubCrafters are certified by the FAA under Part 23, Amendment 62. The certification process for this model was completed in 2016, lasted six years, and generated 45,000 pages of compliance reports with more than 2,700 combined ground & flight conditions tested. XCub meets the requirements of more than 1,500 FAA aircraft certification regulations. The XCub is simply the safest, most extensively tested adventure airplane ever certified.
Why miss the 2018 flying season and wait a year or more for a new production XCub when N75XC is ready to fly away today? The engine Break-in is just barely complete on this very low (less than 50-hour) time no damage history aircraft that is listed at less than current MSRP and is in factory-new condition and being offered with an extended Factory warranty.
This aircraft is ready to go now for any 2018 backcountry flying adventure!
Garmin aera 796 moving map GPS w/aeronautical charts
Garmin G5 electronic attitude indicator (upgrade!)
Garmin GDL 84 ADS-B package (upgrade!)
Trig TY91 comm radio
Trig TT22 transponder
Electronics Int’l CGR-30P digital recording engine monitor
— Oil Pressure/Temp
— 4 channel CHT’s
— 4 channel EGT’s
— Carburetor temp
— Outside air temp
— Fuel computer
Analog airspeed indicator
Analog 20,000′ altimeter
PS-Engineering PM3000R stereo intercom
Lycoming O-360-C1G – 180 horsepower
Hartzell Trailblazer composite, constant-speed prop
Electroair electronic ignition system (upgrade!)
Carbon Composite spinner
Spin-on oil filter
Engine oil quick drain
Carbon composite two-piece split cowling
Two 24.5 gallon wing tanks w/49-gallon total capacity
Three position fuel selector valve
Lighted Fuel sight gauges
Mechanical (primary) and electric (backup) fuel pumps
WINGS & TAIL
Modified USA35(B) airfoil
G-Series slotted flaps & airfoil ailerons
Direct push-rod aileron controls
Galvanized rudder control cables
Limited “Launch Edition” 4 color paint scheme (upgrade!)
Side-access baggage door
Rear step to enter copilot seat
LIGHTWEIGHT ELECTRICAL SYSTEM
40 amp alternator
Lightweight LED strobe, nav and landing lights
Interior Night VFR lighting package
FLIGHT CONTROLS & INTERIOR
Athanum Scottish leather interior (upgrade!)
Dual flight controls
Dual toe brakes
Dual Electric trim control
PTT switches on pilot and co-pilot controls
ANR headset connections
Adjustable front and rear seats with memory foam cushions
Removable rear seat
TSO’d USB charging ports
12V charging ports
Cabin fresh air vents
Halon Fire Extinguisher
One piece dampened spring-aluminum landing gear (upgrade!)
Grove wheels & brakes
29″ Alaska Bush Wheel tundra tires (upgrade!)
3200B-type steerable baby bush tailwheel by Alaska Bushwheel (upgrade!)
Audible stall, altitude and terrain warnings
Kannad 406 AF Integra ELT w/GPS
Visual fuel gauges
Complete 4130 reinforced fuselage
Annual & Warranty
First CubCrafters Annual Inspection completed in April of 2018 (all Service bulletins completed).
6-month CubCrafters Factory Warranty extension with full price offer!
Price: USD $350,000
Brad Damm – Factory Direct Sales Northwest | 509.961.2313 | firstname.lastname@example.org
Mark Keneston – Factory Direct Sales Northeast | 518.410.9404 | email@example.com
IMPORTANT – For international buyers: XCub is now EASA Certified for export to all of Europe. Additional Certification approvals are in place for Canada, Japan, and East Africa (via Kenya), with Austraila and New Zealand approvals in process. For overseas buyers, an additional fee of USD $3,800 will be required to deregister, provide an Export Certificate of Airworthiness, and disassemble & crate this aircraft for overseas shipment.